D-Lite Fuji
Installing a D-Lite Fuji
Measure the Frame Length: Measure the length of the frame along the slope, then add 10 cm (eaves) to get the total sheet length. For example, if the frame extends 1.90 m, cut the sheet to 2 m.
Starting the Installation for D-Lite Fuji Start with a Full-Meter Sheet: Begin installation with a full-meter sheet and proceed in one direction. Position the Outer Edge with the Female Rib First: Start at the outer edge with the female rib (long end) to ensure proper overlap. Align the Rib Ends: Observe that the ends of the ribs differ on each side. Always overlap the female rib (long end) over the male rib (short end).• Male Rib: Shorter end. • Female Rib: Longer end.
Installing D-Lock on D-Lite Fuji
• Place the D-Lock on the Rib Joints: Install the D-Lock only on the rib joints and secure it with screws.
• Screw Along the Purlin Line: Attach screws along every rib, following the purlin line.
• Middle Rib Installation: Secure the middle rib directly with screws onto the sheet.
• Align Rib Overlaps: When overlapping ribs, place the male rib (short end) on top of the female rib (long end). Then, place the D-Lock over the overlap and secure it with screws.
• Leave Space for Flashing: For the final rib, leave space between screws to allow installation of the flashing for the corner cover.
Continue Installation for the Entire Awning
Installation Guide Video for D-Light Fuji
